skillgirdle67

www.thekeylab.co.uk If your 500 key fob isn't working Try another one to see if the car can detect it. If it does, then it could be a problem due to the battery or water damage to the fob that was originally used. Replace the battery first. The “+” side should be facing down. Dead Battery The battery is usually the reason for a fob not working. It's a simple fix, and most fobs warn you when the battery is running low. You can find instructions on YouTube for nearly any key fob for your car, or in your owner's manual. You can also replace it by taking it to the locksmith or dealer who sold it to you. Sometimes a fob stops functioning due to a malfunction with the internal circuit board. This is a bit rare however it can happen. The internal chip may be damaged in the event that you drop the fob onto something hard. It can occur if you use an aftermarket fob and it doesn't work. In this case it is essential to visit a dealer locksmith to have the key reprogrammed to work with your 500. One 2012 FIAT FIAT 500 flip key remote – Looks-alike Ilco with lock, unlock, and trunk buttons – new keyless entry replacement (will need to cut & program by locksmith). Damaged Chip Fiat 500 key fobs are wireless devices that send signals to the car every time you press the button. It is equipped with a microchip that has information about the code required to communicate with the car. If the chip is damaged, it won't transmit the correct code and the car won't begin. It's possible to repair this kind of damage, and a locksmith can help. United Locksmith is capable of providing this service for old models as well as the latest ones, so don't hesitate to call them. scared to contact them. You can buy a new fob and have it programmed professionally by locksmiths. It is cheaper to do this rather than going to a dealer and it performs the same. You'll have to provide certain details to the locksmith, such as the year that your car was built and the model. Rub the chip with an old dollar bill if you're not sure what to do. The copper in the bill is abrasive, and will remove dirt and oxidation. However, it will not harm the microchip. If the chip is physically damaged, however, it may not be repairable. This can happen when you drop it or run it over by your vehicle. Water Damage Water damage is likely to happen on your fob, no matter if you dropped them in the pool unintentionally or put them in the pocket while swimming, or splashed water on them during a rainy afternoon. Even if it's just a tiny amount of water on the key, it could cause serious issues with the electronics inside and stop it from functioning correctly. The good news is that you can usually fix this problem by removing the fob's key and using a the paper towel to cleanse it of any dirt or water that remains. Once the fob is dry it is possible to replace the battery and it should begin working normally. You can also take it to an auto shop or locksmith to get it professionally programmed and cleaned. These experts are able to utilize special equipment to make sure that the key fob works with your car's computer. If your Fiat 500's main fob isn't working, it can be stressful and frustrating. It's costly and difficult to transport your key fob to the dealer. Locksmiths can handle every aspect of your car's key fob replacement without the necessity of a dealership visit. They are a far better choice than an auto dealer. Pairing Issues If you accidentally drop your keyfob, or it ceases to function, and nothing else seems to be wrong, it may be the chip. This could be due to water damage or a dead battery. This is often done by simply following the instructions in your owner's manual. However, it's a good idea to have a locksmith from your automotive do this if you're having trouble or the instructions in the manual don't work for you. This will ensure that the chip is not damaged, and is the most affordable alternative. Another problem with some 500 owners is that the key fob will not secure the car. This could be a problem when you intend to fill up at an gas station. Some owners have reported their 500's locking mechanism failing and having to replace the entire intermediate shaft for steering. This issue was mentioned in a technical service bulletin (TSB) issued by Fiat. If you're having trouble with your Fiat or other car, a reputable locksmith can help. They'll duplicate your key or make you new keys that unlock and start your car. They are able to do this without looking at your old key, and it's usually cheaper than buying one from a dealer.